Flexible feeder AIVE2.0 and 3.0

Accurate sine wave vibration
•Elaborate frequency control suitable for small components
•Various communication support (TCP/IP, Digital I/O)
•Simple control (Frequency, distance, time)
•Backlight embedded
Specifications
•Vibration method : Strok, Frequency and Time
•Strok : Max ±7.5mm
•Frequency : Max 90Hz
•Offset Home positionning : +7.5mm
•Connection to robot : TCP/IP, RS232, Digital I/O
•Power : DC24V
•Temperature : 10°C to 40°C
Brocher
User Manual
PC software manual
AIVE2.0
Recomend parts size : 0.5~30mm
Platform : 120mm x 150mm
.png)
AIVE2.0.pdf
AIVE2.0-vs.pdf
AIVE2.0.dwg
AIVE2.0-vs.dwg
AIVE2.0.stp
AIVE2.0-vs.stp
AIVE3.0
Recomend parts size : 0.5~30mm
Platform : 120mm x 150mm
AIVE3.0.pdf
AIVE3.0.dwg
AIVE3.0.stp
AIVE3.0-vs.pdf
AIVE3.0-vs.stp
AIVE3.0-vs.dwg
Easier
Easy and simple patameter setting
The user can adjust frequency, distance, time for vibration.
Light control, home, offset function, test running mode, communication means(USB, Ethernet)
It makes precise sine wave vibration to make motions for dispersing or flipping. Each parts has different shapes so the user has to vary the set up for different parts. Through our program the user can intuitively and flexibly control the vibration motions
Convenience
Direct control button and LED lamp.
Operating AIVE is doable in any circumstance.
The user's able to operate AIVE through manual buttons without even PC, PLC if only power is supplied
Controlling motion 1,2, backlight, home position, etc. is available.
We've materialized all the functions which, are available in I/O control through intuitive buttons. It supports quick operation for testing, and is configured to enable vision setting and manual control.
Faster
The blue part is the actual robot's working area. The 2nd generation of AIVE has been developed with a structure that feeds gradually to the front end even with a spread motion. Through this we realized an improvement in production speed.
The operator supplies many parts to the hopper.
Through this, a certain amount of parts will be supplied to AIVE.
The red part is where the product comes from the hopper. In the previous version of AIVE, we intended that parts are gathered into the center but due to the slowed production speed, these functions are no longer used.